Support

If you notice that the autonomy of your iDive is no more the one you expected make sure to
follow step-by-step this tutorial.

How to recharge your iX3M correctly.

> Plug the USB cable to a wall charger.
(e.g. the wall charger of your smartphone or tablet).



ATTENTION! Most PC and Mac with an advanced power management could stop the electric supply of the USB ports after a while.

The advanced power management of the PC and Mac may disturb the power management of the iX3M (the battery may appear to be completely charged, even if it is not).

The same power management system is used by some PowerBank system.
DO NOT use your PC or Mac or PowerBank(if not RATIO ^®certified) to recharge your iX3M.
Use wall chargers only to recharge your iX3M.




> Check that the o-ring of the USB cable is on its place (see picture)
(The iX3M will not be able to recharge properly if the o-ring is missing).






> Plug the USB cable to the iX3M.

Plug the cable connector, make sure that the small protuberance on the cable head (red in the picture, the color of the dot can be different) is placed as shown in the first picture below.

Gently turn the cable head as shown in the second picture below.








> Even if the iX3M has Li-Ion batteries without memory, we suggest to recharge the iX3M at least for 5 hours.